USB Monitor Version History

saveToLog method added to ISession

ISession.saveToLog method may now be used to save the entire monitoring session to a log file.

Several bugs fixed in MODBUS View

Several bugs have been fixed in both MODBUS View and Legacy MODBUS View data visualizers.

Several bugs fixed in Serial Bridge mode

Several bugs have been fixed in various data visualizers when working in Serial Bridge mode.

Exception in TCP/IPv6 protocol definition

A bug has been fixed that caused an exception to be displayed when parsing TCP over IPv6 packets.

ISession.addDevice method may now match device by its serial number

USB ISession.addDevice method now supports matching device by its serial number.

Crash on startup

Application may crash on startup or when enumerating log files.

Display Filter support for Custom View

Custom View and all standard data visualizers based on it now fully support Display Filter.

Custom View error scheme

Custom View script may now specify which scheme to use for error messages.

Ability to configure Custom View visualizer options for individual visualizers

It is now possible to configure Custom View visualizer options for individual data visualizers (previously, it was only possible to configure them globally).

"Add to Session" command is disabled for Favorites

"Add to Session" is disabled for processing modules in Favorites section. It was still possible to add them to a monitoring session by double-clicking. This is now fixed.

"-run" command line parameter did not work correctly

Fixed -run command-line parameter (load and execute scripts) not working correctly.

Crash on start-up

Device Monitoring Studio may start crashing on start-up if invalid protocol file is found in protocol library.

Several reported bugs fixed

This release fixes a number of reported and internally discovered bugs.

Playback time range selection bug

It was sometimes impossible to select the desired time range for the log file playback on some computers.

usb.ids file updated

usb.ids file that contains descriptions for USB devices and features has been updated to the latest version.

Errors in HID report parsing

Application sometimes parsed HID reports incorrectly in HID View data visualizer.

Crash on startup

A rare crash on startup has been fixed.

Crash on session configuration update

A rare crash during updating a running monitoring session configuration has been fixed.

Several reported bugs fixed

This release fixes a number of reported and internally discovered bugs.

Updated Custom View refresh rate

Improved smoothness of Custom View (and other visualizers based on it) refreshing and scrolling.

Missing Get/Set Feature Report function

Get/Set Feature Report function was missing in HID Send window.

Duplicate items in HID Send window

Devices were sometimes duplicated in HID Send window.

Crash during rendering packets in some data visualizers

Some data visualizers failed to render huge packets, leading to crash.

Crash when opening damaged log files

Program may crash trying to open (or even enumerate) damaged log files.

Fixed addDevice function with new logs

It was impossible to use the addDevice scripting function with new DMSLOG8 log files.

Visualization of top-level packets in Structure View

Structure View data visualizer is now capable of displaying bound packet data for top-level collapsed packets.

New built-in visualizer() function

New built-in visualize() function allows protocol definition code to invoke standard field visualization algorithm, including automatic invocation of display attribute.

Log enumeration performance improvements

Improved performance when enumerating log files. This greatly improves application initialization time when there are hundreds of log files in default log folder.

Broken log file name generation

Wrong character 'o' used instead of '0' in auto-generated log file name.

Crash on application exit

Device Monitoring Studio may crash on exit.

Filter string syntax error

Application incorrectly rejects valid filter expressions. This fix also allows constant filter expressions to be used (previously they did not work as expected).

Protocol definition errors are not displayed

In some situations, protocol definition errors may not be displayed in Output window.

Cursor jumps randomly when item is expanded in Structure View

Fixed random cursor jump after expanding packet in Structure View data visualizer.

Structure View displays local packet index instead of packet's ordinal number

Structure View now correctly displays session-unique packet ordinal number.

Playback session cannot be started from script

Unable to start a playback session with new logging format from script.

New logging system crash

Application could crash during recording log using new logging format.

New Logging Format

New data logging format (DMSLOG8) supports the following logging modes:

1. Unlimited single-file mode (similar to the previous format DMSLOG7)
2. Limited by size multiple-file mode
3. Limited by duration multiple-file mode
4. Limited by size single-file mode
5. Limited by duration single-file mode

In limited multiple-file modes the user may additionally limit the total number of files per log. In limited single-file mode oldest data is automatically overwritten by new data according to specified limit.

Several reported bugs fixed

This release fixes a number of reported and internally discovered bugs.

Packet View numbers bug

Packet View may incorrectly display numbers. Fixed.

Raw Data View Eastern languages bug

Raw Data View may display incorrect data if system locale is set to one of eastern languages. Fixed.

Structure View update bug

Structure View window may not be updated when new packets are added. It can also lose focus and not update command states. Fixed.

Playback in stepped mode broken

Next button may not appear in stepped playback mode. Fixed.

Settings in property pages not saved

Changes made in some of the settings property pages are not saved. Fixed.

Raw Data View mouse wheel or touch scroll bug

Raw Data View may scroll incorrectly when scrolled by some high-definition mice or touchpads.

Beta packages could not be installed

Beta packages could not be successfully installed on Windows 7.

Errors in remote monitoring

Sometimes garbage data may be received from the remote monitoring session. Fixed.

Crash on application close

An application could crash on exit on slow (or busy) single-CPU computers.

Hang on application close

An application could hang and had to be killed by Task Manager in some cases after changes had been detected in watched folders (log files, structure definition files or custom view implementation files).

Packet View performance issues

Packet View could not sustain high packet rate (for example, log playback in continuous mode).

Packet View packet loss

Packet View could start "losing" packets when session contained several hundred million packets.

Various performance improvements

Improved performance of the following data visualizers: Raw Data View, Structure View, Packet View, Custom View.

Failed log playback

There was an error playing back recorded log files in some cases.

Continuous mode playback performance improved

Playback performance in continuous playback mode was improved.

Filter string could not contain hexadecimal numbers

It was not possible to use hexadecimal numbers in capture/display filter string.

Display Filter not working correctly

Display Filter could not be applied for some sessions after they have been started.

Workspace loading order bug

Workspace components loading order has been updated. Now, if workspace contains a serial terminal session and monitoring session for the same port, a monitoring session is guaranteed to be started before the terminal session.

Unable to start script upon launch

Script files specified on command line with "-run" option failed to start if they were using monitoring session objects.

Hidden zero bytes in USB string descriptors

Sometimes zero bytes were stored as part of USB device string descriptor which made them unavailable to use in scripts.

Several reported bugs fixed

This release fixes a number of reported and internally discovered bugs.

Several reported bugs fixed

This release fixes a number of reported and internally discovered bugs.

Performance improvements

This release has increased performance in various key scenarios.

Several reported bugs fixed

This release fixes a number of reported and internally discovered bugs.

HID Send

New HID Send module allows the user to directly control USB HID device. This component may be controlled either from the user interface or with scripting.

Several reported bugs fixed

This release fixes a number of reported and internally discovered bugs.

Several reported bugs fixed

This release fixes a number of reported and internally discovered bugs.

Several reported bugs fixed

This release fixes a number of reported and internally discovered bugs.

Several reported bugs fixed

This release fixes a number of reported and internally discovered bugs.

This is a new major version release. The following features are new or have been significantly improved compared with the previous version:

Script Debugger

Increased support for scripting in Device Monitoring Studio calls for better tools. The built-in script editor with auto-completion support and built-in documentation is now accompanied by a script debugger.

The user may now place breakpoints, and perform stepping while debugging his scripts. The Watch tool window and Stack Trace tool window provide the detailed information about the script execution state.

Custom View Visualizer

The Custom View data visualizer is now out of beta. It has been redesigned and is now backed by TypeScript (not internal protocol definition language). Serial's Request View and Console View have been rewritten using Custom View.

Custom View data visualizer allows the user to consume the information produced by protocol binding module and display parsed data with rich visualization capabilities.

Extended Scripting API

This release extends the list of components that may be controlled from TypeScript (JavaScript) scripts executing inside the Device Monitoring Studio:

1. File Manager object.
2. TCP Session, UDP Session and TCP Listener objects.
3. Updated Serial Terminal object.
4. New MODBUS Builder Object.

Added support for promises

Scripts may now use promises and async/await language operators.

New 'delay' function

New function delay added that returns promise, which is completed after specified number of milliseconds.

HTML Copy/Export in Custom View

Custom View now supports copying/exporting selected data in HTML format. New Request View and New Console View data visualizers, which are based on Custom View, also support this feature.

Updated TypeScript version

Built-in TypeScript compiler updated to version 2.3.0.

Improved performance

Application start-up performance has been improved.

Crash on playback in continuous mode

Application could crash if playback was running in continuous mode.

Fixed "Invalid Configuration" message on license installation

An "Invalid Application Configuration" message could be displayed after successful license installation. This has been fixed.

Improved USB descriptors parsing and displaying

This release adds detailed USB descriptor parsing to Structure View data visualizer. USB Monitor now also shows the same information in Configuration Descriptor window. More USB 3.0-specific descriptors are now supported.

Several reported bugs fixed

This release fixes a number of reported and internally discovered bugs.

Incorrect data in Statistics View

Statistics View data visualizer incorrectly calculated data for isochronous pipes.

Descriptor parsing in Structure View

Structure View now parses and displays device descriptors, HID descriptors, Audio and Video descriptors and communication descriptors.

Improved protocol definition language

This release adds new directives and attributes to protocol definition language, adding look-ahead support to protocol binding.

Incorrect descriptor decoding

USB device descriptor and HID descriptor were not displayed correctly.

Several reported bugs fixed

This release fixes a number of reported and internally discovered bugs.

Several reported bugs fixed

This release fixes a number of reported and internally discovered bugs.

Several reported bugs fixed

This release fixes a number of reported and internally discovered bugs.

Several reported bugs fixed

This release fixes a number of reported and internally discovered bugs.

New script editor

New script editor is introduced with support for auto-completion and error highlighting.

High-DPI Support

This release makes Device Monitoring Studio fully compatible with high-definition displays.

Dropped support for Windows XP and Windows Vista

Starting from this version, the minimum supported OS is Windows 7. Application no longer supports Windows XP and Windows Vista. The minimum supported server OS is Windows Server 2008 R2.

TypeScript support

TypeScript is now always supported, the requirement to have Internet Explorer 11 installed is removed.

New scripting engine

Updated scripting engine with support for ES6. This allowed us to improve various APIs provided by Device Monitoring Studio components. For example, all methods that worked with Array objects now also work with typed arrays, array buffers and data views.

Several reported bugs fixed

This release fixes a number of reported and internally discovered bugs.

Several reported bugs fixed

This release fixes a number of reported and internally discovered bugs.

Several reported bugs fixed

This release fixes a number of reported and internally discovered bugs.

USB Audio/Video 1.5

This release adds support for parsing USB Audio and USB Video version 1.5. This includes new protocol definitions and new visualizer.

Restart device not working

Restart device command (in Dependent Devices window) now works as expected.

Log file playback error

Device Monitoring Studio crashed when user attempted to play back log files with long "gaps" - periods without data.

Errors in USB monitoring driver

Several errors have been found and fixed in USB Monitor filter driver.

Crash on startup

Several bugs have been fixed that could cause application to crash on startup.

Crash on Next Connected

"Next Connected" monitoring session could crash Device Monitoring Studio after device had been connected to the computer.

Better support for USB devices

USB Monitor now supports monitoring of more USB device classes and drivers.

Crashes on startup

Several problems causing application to crash on start have been fixed.

Copy/Export bugs

Several bugs in copy/export code in various data visualizers have been fixed.

Find Next hot key

F3 key now correctly works as Find Next hot key in various data visualizer.

Crash in Communication View

Crash in Communications View data visualizer has been fixed.

Crash on loading invalid workspace file

DMS could crash if invalid workspace file was loaded.

Several bug fixes

This release fixes a number of reported and internally discovered bugs.

Several bug fixes

This release fixes a number of reported and internally discovered bugs.

Several bug fixes

This release fixes a number of reported and internally discovered bugs and improves performance and reliability.

This release is dedicated mostly to polishing various application features. It improves a lot of existing components by fixing bugs and memory leaks. It also significantly reduces application memory requirements and works around memory exhaustion issues, particularly on 32-bit systems.

New Features

This release introduces high-precision session time measurement mode. As of 7.51, this mode is supported by USB, Serial and Network modules. When enabled (per-session), Device Monitoring Studio uses high-precision system timer for packet time-stamping. This mode is enabled by default if Device Monitoring Studio is installed on Windows 7 or later.

Starting from 7.51, various device information is automatically saved to a log file if the Data Recording module is added to a monitoring session. This includes the Serial Device Information for serial devices and all kinds of USB descriptors for USB devices (Device Descriptor, Configuration Descriptor and HID Descriptor tool windows).

When resulting log file is later selected in the Devices tool window, corresponding tool windows are updated with saved information.

Raw Data View and Structure View data visualizers now support additional packet coloring mode. Now they allow the user to choose one of three modes: no coloring, packet interlacing (coloring odd and even packets) and read/write coloring (coloring read and write packets).

Fixed Bugs

This release fixes over 200 different bugs, including crashes. A special attention has been paid to the following:

1. Monitoring session startup and shutdown-related issues, including crashes and hangs. This includes configuring and starting monitoring session, adding or removing data processing modules to running session and stopping monitoring session, as well as changing session's Capture Filter or visualizers' Display Filter for a running session.
2. Capture and display filter performance.
3. Protocol binding performance.
4. Issues with various data visualizers. Almost every data visualizer has been optimized or fixed in some way.
5. Workspace saving and loading issues.

Here is a short list of most remarkable fixed bugs:

Correct emergency session termination

When resources are low, Device Monitoring Studio is now more robust in stopping affected high-data rate monitoring sessions, or session processing modules. This mostly affects 32-bit systems or systems with slow secondary storage.

Log file repairing

Device Monitoring Studio has always repaired damaged log files on startup. If log file was large, it introduced a startup delay (only splash screen was visible and application appeared to be hanging). Now a progress bar is shown to tell the user that application is alive.

Reading USB device descriptors

It was impossible to read USB device descriptors on some systems. The problem seems to be related to incorrect system configuration, damaged host controller driver installation or various security issues. Device Monitoring Studio now has an alternative way to read descriptors if previous method fails. This improves monitoring experience for USB devices on affected systems.

Operating with limited processing resources

During monitoring Device Monitoring Studio uses available disk space as configured in the Data Processing Tab (invoked by Tools » Settings menu command). We have fixed a number of bugs related to Device Monitoring Studio operation under limited settings (like 1% on a single disk and 0% on all others).

"Exporter" data processing modules: Raw Exporter, Text Exporter and Data Recording

A number of bugs have been fixed in exporter modules. CPU and memory usage have been carefully profiled and optimized.

Memory Usage Optimizations

This release also brings improvements to Device Monitoring Studio memory usage strategies. All critical paths have been carefully analyzed and profiled, resulting in memory usage savings of up to 10 times in several places. Application is now much more robust on systems with lower amount of RAM. In addition, when installed on 32-bit operating systems, application is now capable of sustaining much higher data rates during monitoring.

Reduced memory demands now also allow to start "heavier" monitoring sessions - sessions with more data processing modules, complex custom protocols and filter expressions.

Supported OSes

This release drops support for 64-bit Windows XP and Windows Server 2003. 32-bit versions of these operating systems are still supported.

Remote Source now requires at least Windows Vista and will not be installed on Windows XP or Windows Server 2003.

Future releases will drop support for Windows XP and Windows Server 2003 entirely.

UI Layout Update

This release will install new default UI layout (tool windows and toolbars). Any user-defined layout will be overwritten.

Trial period extension

Trial period has been extended to 21 days from 14 days.

Crash after removing data processing modules from running session

Application crashed when a data processing module was removed from a running session.

Invalid behavior after changing visualizer's root protocol

When Root Protocol was changed for the active visualizer, it could result in removing all monitored packets due to incorrect interpretation of empty display filter.

Crash after closing Structure View or Raw Data View visualizers

Application could crash after closing Structure View or Raw Data View visualizers.

New scripting objects: Remote Connection Manager and Bridge Manager

Two new scripting objects added. Remote Connection Manager allows user scripts to establish remote connections. Bridge Manager allows user scripts to create and manage serial bridges. In addition, user script may now add remote devices and serial bridges to monitoring session.

Documentation for predefined fields and functions

All predefined protocol fields and functions have been documented. Additional code cleanup for built-in protocols.

Automatic reconnect for remote sessions

If network connection error occurs during remote monitoring, Device Monitoring Studio automatically tries to reconnect to remote server and continue monitoring.

Typescript updated to 1.5

Built-in Typescript compiler has been updated to version 1.5.

Flow control support for terminal sessions from scripting

It is now possible to set flow control for serial terminal sessions from user script.

Fixed "Minimize to tray" command line switch

Command line switch -m did not work as expected.

Possible crash during remote server connection

Application could crash if connected to remote server running Windows 8 or later.

Fixed script editor auto-indentation feature

Script editor could incorrectly apply auto-indentation in some cases.

Sorted tool windows in View » Tool Windows menu

Tool windows in View » Tool Windows menu group are now sorted, which makes navigation easier.

Application crash if running multiple copies

Application crashed when multiple copies were launched by different users.

Crash during scrolling or exporting a view in long monitoring session

An application crash was possible when the user tried to export or scroll data window in a long monitoring session.

Duplicate entries in Capture Filter Intellisense

There were duplicate items in Capture/Display Filter Intellisense window.

Incorrect installation state if used by different user

Some default configuration settings were missing if application was installed under one user account and then used under another account.

Improved stability on startup

Improved compatibility with third-party software that modifies application files during startup. This has caused early re-compilation of protocol definition files and could lead to crash.

Several bugs fixed

Several reported bugs have been fixed, including application crashes.

Crash on 64-bit CPUs without support for AVX

It was impossible to install and/or use the application on some hardware configurations (like no or disabled AVX support on CPU).

New column in exporter output

New column containing packet time stamps has been added to Raw Exporter and Text Exporter.

TypeScript 1.4

Built-in compiler for TypeScript language has been updated to version 1.4.

Error copying/exporting multiple selection from Raw Data View

Copying/exporting multiple selection produced incorrect data.

Application crash on empty HID descriptors

Application crashed trying to display descriptors for HID device if it had empty descriptors.

Additional checks for temporary folder locations

If for some reason the default temporary disk location is unavailable, Device Monitoring Studio falls back to %TEMP% folder.

Improved support for unknown pipe handles

Monitoring of data transfers with invalid (or unknown) pipe handles are now supported.

Custom Visualizer support (BETA)

This release brings (beta) support for creating custom data visualizers.

Protocol & Script Editor

Built-in script and protocol definition files editor now has auto-indentation feature and brace match feature.

Various bug fixes

Several reported bugs have been fixed.

Improved scripting support

User scripts may now create, configure and start monitoring sessions. Full programming access to all monitoring session aspects, including multiple devices, source configuration, capture filters and visualizers and their configuration is provided. Scripts may be written in TypeScript language (superset of JavaScript), which gives better syntax and error checking. VBScript support has been discontinued.

Monitoring session initialization script may be automatically generated from the New Session window.

Built-in script editor

Device Monitoring Studio now has a built-in script file editor, which supports syntax highlighting and marking of error locations.

Several bugs fixed

Several reported bugs have been fixed, including application crashes.

Various playback bugs

Several bugs and inconsistencies in Playback module have been fixed.

Log file format change

Due to fixing a bug in USB Monitor Playback, the format of log files has been changed. Old log files are still supported, but new log files will not be playable in previous versions of Device Monitoring Studio.

Playback of sub-range

Playback of the portion of log file in USB Monitor has been fixed. Note that this release changes the format of log file.

Playback improvements

The performance and stability of Playback on high speeds have been improved.

Coloring page fixed

Changing font size on the Coloring page has an effect now (Tools » Settings).

Protocol List window fixed

Delete now works correctly in Protocol List window.

Configurable auto-hide tool windows timeouts

User may now configure timeouts to open and hide auto-hide tool windows.

operator[] for strings

Operator [] now works with string value types.

Improved multi-monitor support

If a floating tool window is positioned on a secondary monitor which is later disconnected, Device Monitoring Studio automatically moves the tool window in sight next time the application is launched.

Social plugin changes

Social module does not require authentication to read contents anymore and provides notifications for updates. It is also now supported on Windows XP.

Wrong tooltip after window drag

If you changed the position of opened windows using mouse, window title tooltips remained at the old position.

Compiler error visualization

Visualizers now correctly display packet binding errors.

Built-in protocol definition editor

This release introduces the built-in protocol definition editor. Now you may modify any built-in protocol definition or define your custom protocol directly inside Device Monitoring Studio. Automatic re-compilation and rich error reporting are provided by the DMS.

Context menu not working in Devices window

You could not invoke a context menu in Devices tool window using keyboard. Only right mouse click worked.

Minor bug fixes

This release fixes a number of discovered and reported errors, including application crashes.

UsbPayload protocol

This release adds UsbPayload protocol. When used in data visualizers, binds to the monitored data directly, skipping packet headers and control pipe transfers. This is now a default root protocol for Raw Data View visualizer.

DMS 6 Log Converter Beta

Device Monitoring Studio 6.xx Log Converter Beta added. This console utility may be used to convert log files from DMS 6.xx format to DMS 7.xx format.

Crash on session change

Device Monitoring Studio crashed when you changed the root protocol on newly added visualizer on a running session.

Data visualizers did not work in Playback sessions

HID View, Audio View and Video View did not show any data during USB log playback.

USB Monitor did not properly support composite devices

This resulted in decrease of the number of discovered devices compared to DMS 6.xx.

Multi-source Monitoring

Device Monitoring Studio supports joining monitored data from multiple sources of the same type into a single monitoring session. It is possible to monitor two or more serial ports, USB devices or network adapters. Device Monitoring Studio makes sure packets are correctly sorted and presented through a number of supported data visualizers. Data logging also supports multi-source sessions.

Remote Monitoring

DMS 7 supports monitoring USB and serial devices connected to remote servers. A single client may monitor several servers and a single server may be monitored by multiple clients. A separate server installation is provided. It includes a server access module, serial and usb monitoring modules, administration and management module and documentation. A server is managed using the MMC Snap-In or from Windows Scripting Host or PowerShell.

Windows 8 Support

DMS 7 officially supports Windows 8 and Windows Server 2012.

USB 3.0 Support

USB Monitor introduces support for USB 3.0 host controllers and devices.

Built-In and Custom Protocol Parsing

DMS 7 extends protocol parsing support for all monitoring modules: network, USB and serial. In addition, this version has new implementation of protocol parsing, which is more flexible and greatly improves performance.

New Data Processing Category

New processing category is introduced: data exporters. These are components that process monitored data in some way, but do not produce any visible output on the screen. Data recording module now belongs to this category. Other data exporters are Raw Data Exporter and Text Exporter. Both these exporters are capable of using built-in or custom protocol definitions to parse monitoring data before exporting.

Parallel Processing

New version of Device Monitoring Studio utilizes multiple cores for more responsive monitoring session operation. It basically allows the user to still perform real-time monitoring of 1 Gb network transfer without packet loss and slowdowns while having such "heavy" processing like Capture Filter and Display Filter configured for a monitoring session.

Device Tool Window

New tool window that displays all devices the user can monitor in a single customizable view. For each supported device, its image, type and current state are displayed. The user may start, stop and configure monitoring sessions, view device properties, restart and rename devices.

Sessions Tool Window

New tool window lists all currently running sessions and their properties. It allows you to close data visualizers, add new data processing modules, pause, resume or stop sessions. It also allows you to quickly change data processing modules configuration. For example, for data recording, the current log file size is displayed. By clicking "End Stream", the user ends the current stream and starts a new one.

Protocol-Based Data Visualizers

Structure View and Raw Data View data visualizers for USB, Serial and Network with additional filtering (Display Filter) and ability to specify root protocol.

Automatic Layout Loading

DMS 7 automatically loads separate tool window and command layout when monitoring session is started. Thus, until a session is started, a layout which simplifies device discovery and information retrieval is used. After the session is started, another layout is automatically loaded streamlining monitoring session usage. Both layouts may be customized by the user.

Global Configuration Switch

Device Monitoring Studio provides you with a global switch to quickly turn it into Serial Monitor, USB Monitor or Network Monitor. This switch may be used in combi installations to temporary hide unneeded components.

Session Configuration Window

New Session Configuration window greatly simplifies session creation and modification. There is a list of configured sources at the top of the window. Below are optional device configuration settings, buttons to add more devices and remove existing ones.

Depending on the type and number of configured sources, a list of available processing modules is populated. It is divided into two main categories: visualizers and exporters.

Double-click on the processing module to add it to the current session. Some of modules support configuration. Customized processing modules may be saved for future use.

Finally, the user specifies a capture filter, a generic (protocol-based) conditional expression used to filter out specific monitored packets.

Corrupt log file handling

Device Monitoring Studio may crash when it encounters corrupted log file.

Installation problem

Installer may fail with 0x8007000a error code in HHD Setup Log File.txt.

Several bugs in Structure View, Raw Data View and URB View

Several bugs in USB Monitor Structure View, Raw Data View and URB View data visualizers were fixed.

Video descriptors rendering bug

Some USB video class descriptors (Configuration Descriptor tool window) were parsed and displayed incorrectly. Fixed.

New data visualizer: Structure View (USB)

New data visualizer has been added to USB Monitor. It parses monitored data according to a set of loaded protocol definition files and displays the parsed data in tree view and raw binary view.

Capture filter (USB)

It is now possible to define a capture filter — an expression which is evaluated against each monitored packet. If expression's result is false, the packet is discarded, otherwise, it is sent for further processing.

Display filter and root protocol (USB)

Each opened Structure View window may additionally have its own "display filter" to further filter incoming data. In addition, each window may use its own "root" protocol for each monitored packet.

Custom protocol (USB)

In addition to a set of pre-defined protocols, a user may now create his own protocol definition files and have USB Monitor automatically parse monitored data according to them. Capture and display filters are also capable of using these new protocol definitions in their expressions.

Bug in Hex Editor Neo integration

DMS could not find Hex Editor Neo if it was installed for all users. Fixed.

Process packet data with Hex Editor Neo

New "Process with Hex Editor Neo" command has been added to Raw Data View visualizer. It copies the selected packet data and opens it in installed copy of Hex Editor Neo.

Improved setup speed

Speed of Device Monitoring Studio setup application has been greatly improved. Installer now needs to update less files and system settings and operates much quicker.

Improved application start-up time

We have improved the application start-up time by reducing time required by various components to initialize and allowing several components to initialize in parallel.

Improved performance

This release has improved performance thanks to optimization of various core components and the use of new compiler.

License update

Registered users: A license update is required!

A new license may be downloaded from the My Account.

Several reported bugs fixed

This release fixes several reported bugs, including application crashes.

Integration with Windows Error Reporting

Application now fully integrates with Windows Error Reporting. If it ever crashes or hangs, you can submit the report, which will allow us to fix a bug and provide a solution.

Possible BSOD

A system may crash when power policy is changed for some USB devices with USB Monitor installed. Fixed.

Application may fail to start

Sometimes an application may fail to start. Fixed.

New column in Packet View

Packet View now has a new column "Time Diff" that displays the time difference between packets.

Several bug fixes and performance improvements

Several reported bugs have been fixed. This release also has different stability and performance improvements.

Crash in Packet View

USB Monitor may crash in Packet View in some rare situations. Fixed.

Invalid data filtering in Packet View

Packet View incorrectly filtered data. In addition, filtering is now ignored for visualizer if it is inside Packet View.

Invalid data filtering in Packet View

Packet View incorrectly filtered data. Fixed.

Improved Packet View visualizer

Packet View visualizer is now much faster and smoother.

Improved support for composite devices

USB Monitor's data visualizers now correctly work with multiple interface USB devices. Previous versions failed to correctly display "older" packets exchanged over the previous interface endpoints after the new interface was selected. Now application operates correctly in this case.

Invalid data exported from Packet View

When filters apply to Packet View and you export selected rows, incorrect data is exported. Fixed.

New option to hide packet tooltip in Raw Data View

Raw Data View visualizer now has additional option that allows you to disable packet information popup.

New filtering options

This release adds more filtering options to Request View (Serial & Bridge), URB View (USB) and Packet View. It also changes the default color settings for Request View and URB View data visualizers.

Default filtering has also been modified: it now does not display Read DOWN and Write UP requests by default. You can change this behavior in the Tools » Settings… » Filtering Tab.

Crash in Raw Data View visualizer

A crash in Raw Data View visualizer has been fixed.

Raw Data View Visualizer

This new data visualizer, called Raw Data View is similar to Serial Monitor's Data View in that it also has two windows, one of which displays data sent to a device, and another one displays data received from a device. All subsequent packets are concatenated into a single data stream, which is displayed as a sequence of hexadecimal, decimal, octal or binary numbers. Alternatively, the stream may be displayed as a sequence of floating-point numbers with single or double precision.

This new data visualizer is very flexible and allows you to customize both its layout and appearance. It has a built-in pattern coloring, powerful find capabilities and Clipboard/exporting support.

Filtering for Packet View

You may know apply filtering to a Packet View data visualizers.

Quiet installation mode

A new command line switch, "/q" may be passed to the USB Monitor's installer to perform a non-interactive installation/uninstalltion of the product.

Crash during monitoring

A crash that occurred sometimes during monitoring has been fixed.

Crash in logging module

A crash in data logging module has been fixed.

New driver installation framework

This release features a new driver installation mechanism. Setup now uses built-in Windows services to install the filter drivers for USB monitoring, resulting in much lower risks of permanently disabling USB devices.

Filtering by endpoints

URB View visualizer provides a list of all device's endpoints in the popup menu. You may select the endpoints to be filtered using this menu. Combined with an ability to have as much URB View visualizers as you need, you may open one data visualizer for each endpoint, for example.

Appearance customization

This release brings you the possibility to change the appearance of visual elements of the following data visualizers:

• Audio View
• Communications View
• HID View
• Mass Storage View
• URB View
• Still Image/MTP View
• Video View

License update

Registered users: A license update is required!

A new license may be downloaded from the My Account.

Configuration Descriptor window updates

A configuration descriptor window's behavior has been fixed and updated to comply with USB 2.0 specification. In particular, a better support for HID and MIDI Streaming devices is provided.

Fixed reported bugs

A lot of reported bugs have been fixed in the product.

Incorrect version determination

Incorrect version determination has been fixed.

Toolbar bugs

Several toolbar customization bugs have been fixed.

HID View visualizer bug

HID View visualizer not working on x64 systems bug has been fixed.

Toolbar bugs

Several toolbar customization bugs have been fixed.

Updated functionality

This release updates functionality and behavior of several included modules as well as some portions of user interface.

Bug fix release

This release fixes several reported bugs.

Export Binary command

Export Binary command may be used to export binary packet data.

Several bugs fixed

A number of reported bugs were fixed.

Automatic Data Policy Management

There has always been a feature in the Device Monitoring Studio, called "Data Processing". It could be and still can be used to control the data processing policy. You can trade disk space usage for a session history length. More disk space you allow Device Monitoring Studio to use, more older session packets are available for you.

Version 5.22 introduces an automatic data policy management for monitoring sessions. If only Logging and/or Statistics visualizer are configured for the monitoring session, it is forced to low disk space usage policy. If any other visualizer is configured for the monitoring session, it falls back to the setting, defined by the user.

High-Speed operation mode

The High-Speed mode is automatically enabled for a session, for which only the Statistics visualizer is configured. In this mode the amount of data analyzed by the application is reduced significantly, leading to more accurate performance measurements. This mode is useful if you have a device with extremely high transfer rate (more than 16 MB/s) and want to measure its performance.

Performance optimization

The performance of the USB Monitor module was increased.

Several UI bugs

Several user interface bugs were fixed.

Keyboard Map printing

Keyboard Map can be printed or copied to the Clipboard.

Generic open feature

Device Monitoring Studio is now capable of opening log files and tool window configuration files in addition to workspaces. They can be opened through the File|Open menu option, dropped from Windows Explorer, or specified in the command line.

GPF in Mass Storage View

Application may crash in Mass Storage View visualizer, if it is configured for unsupported devices. Fixed.

Several GPFs

Several application crashes were fixed.

USB Communications View visualizer

This release adds support for USB Communications class via the specific Communications View visualizer. Configuration Descriptor window has also been updated to decode communications class specific descriptors.

Generic Filtering feature

Generic filtering feature allows you to configure filtering for different visualizers and create filtering schemes, which then can be quickly applied to different visualizer windows. This feature is utilized by Audio View, Communications View, Mass Storage View, URB View, Still Image/MTP View and Video View visualizers.

New options in Playback context menu

Playback context menu now has two additional options: “Collapse All” and “Expand All”, which can be used to collapse/expand log file names and log streams in the tree.

Application loading time improved

Device Monitoring Studio loading time is improved in case there are a lot of log files in the log file folder.

Playback bugs

Several bugs in Playback tree and playback module were fixed.

Audio View and Video View bugs

Several bugs in Audio View and Video View visualizers were fixed.

Several streams in log file

You were unable to create multiple streams in a single log file - fixed.

Mass Storage View and Still Image/MTP View rendering bugs

Several rendering bugs in Mass Storage and Still Image visualizers were fixed.

Program Crash

The program may crash on some computers on startup. Fixed.

Invalid control pipe requests

USB Monitor incorrectly displays standard control pipe request name. Fixed.

Export works incorrectly

Export to text file feature produces incorrect results. Fixed.

USB hubs switched off after program uninstallation

On some machines USB devices may become inactive after uninstalling the Device Monitoring Studio. Fixed.

Installation bug on Windows XP x64 and Windows Server 2003 x64

On some machines running Windows XP x64 and Windows Server 2003 x64 the product refuses to install. Fixed.

Application crash on USB device selection

The program may crash when you select some USB device in USB tool window. Fixed.

64-bit Platform Support

Device Monitoring Studio now fully supports 64-bit operating systems, including Windows XP x64 Edition, Windows Server 2003 x64 Edition and Windows Vista x64 Edition.

All Device Monitoring Studio binaries were ported to 64-bit (not only filter drivers), resulting in much better performance and scalability. The single installation package is used to install application on 32-bit and 64-bit operating systems.

Please see the included release notes for previous version compatibility issues.

Log Files Sharing

Log files can now be shared among several running copies of the Device Monitoring Studio (either locally or over the network). Log files can be shared only for playback.

Still Image/MTP View Visualizer Bugs

Several bugs in Still Image/MTP View visualizer that prevented it from parsing data for some devices were fixed.

Access weakened

The Device Monitoring Studio incorrectly tried to open resources with high privileges resulting in inability of less privileged user to use some of the program features (it still worked, although). The access mode was weakened for all such cases, resulting in Administrative rights being required only during application install.

Composite device support for Windows Vista

Composite USB devices are now supported under Windows Vista operating system.

New visualizer - USB Video

USB Video visualizer parses packets and configuration descriptors for USB Video (version 1.1) compliant device.

MTP Protocol support in Still Image visualizer

Still Image visualizer now supports MTP protocol as well.

New visualizer - USB Audio

USB Audio visualizer parses packets and configuration descriptors for USB Audio (version 1.0) compliant device.

Statistics visualizer

Statistics visualizer offers performance and user interface improvements. Performance has been significantly improved.

Log File Playback

Log File Playback's performance is greatly improved on high speeds. You won't see a "Playback stopped due to low memory conditions" message anymore.

GPF on working with some Mass-Storage devices

The program may crash when you plug a Mass-Storage device. Fixed.

GPF in certain UI windows

The program may crash while displaying certain interface windows. Fixed.

Numerous bugs in Statistics visualizer

Splitter position control, AutoFit bug, Packet Count bug, Static/Tracking Line positioning bug. Fixed.

Display Hint context menu command inaccessible

It is impossible to use the Display Hint context menu option in visualizers, only double click works in this case. Fixed.

Crash on monitoring session name change

Monitoring may crash if the name of the monitoring session changes

Playback stopped due to low memory conditions

You may receive "Playback stopped due to low memory conditions" while playing back a log file at high speed (8:1, 16:1 or continuous). Fixed

Error reading some huge log files

Huge log files sometimes may not be read - the playback stops while there is a lot of data left. Fixed

Incorrect behavior of several visualizers if restricted policy is set.

If Data Policy set to the lowest values, you may experience errors working with visualizers, including URB View and Packet View. Fixed.

Incorrect log file stream names displayed

Playback can sometimes display incorrect characters in log file streams. Fixed

Incorrect parsing of USB Isochronous packets

USB Isochronous transfer packets are incorrectly parsed and displayed. Fixed

Statistics View Visualizer

The update to the Statistics Visualizer, started in the previous release, is finished. Several new counters and user interface features are available in the visualizer. It now includes the following counters:

• Packets Total/Sec
• Packets Read/Sec
• Packets Written/Sec
• Bytes Total/Sec
• Bytes Read/Sec
• Bytes Written/Sec
• Control: Bytes Total/Sec
• Control: Bytes Read/Sec
• Control: Bytes Written/Sec
• Bulk: Bytes Total/Sec
• Bulk: Bytes Read/Sec
• Bulk: Bytes Written/Sec
• Interrupt: Bytes Total/Sec
• Interrupt: Bytes Read/Sec
• Interrupt: Bytes Written/Sec
• Isochronous: Bytes Total/Sec
• Isochronous: Bytes Read/Sec
• Isochronous: Bytes Written/Sec

Some or all of these counters may be active in the visualizer. As always, line width and color, scale and fill mode can be specified for each counter individually. Splitter is added between the plot area and statistics area.

Export statistics data to CSV file added.

Compatibility Issues

Several compatibility issues were fixed. Previous versions of the USB Monitor required several re-plugs of some USB devices before being able to monitor them. Now compatibility with such devices is increased.

Minor Bug Fixes

Several minor bug fixes, including incorrect HID descriptor parsing (for some devices) and some rare memory leaks.

Setup error logging

Setup now creates an error log file in case of an error.

Statistics Visualizer updated

Statistics Visualizer now offers several new data counters.

Rendering bug

Notification rendering bug in Windows Vista has been fixed.

Minor bug fixes

Some minor bugs and inconsistencies have been fixed.

Compatibility Issues

Several compatibility issues have been fixed.

Rendering Bug

Rendering bug in visualizers has been fixed.

Compatibility Issues

Several compatibility issues have been fixed.

Several GPFs fixed

The program crashed in some rare situations.

Bug in MaxPower configuration descriptor field

The bug, which has caused the maximum power to be displayed 4 times less, has been fixed

Incorrect parsing in URB View

URB View visualizer incorrectly parses some packet types.

Downloader

Built-in downloader provides automatic updates functionality.

GPF: Descriptor parsing

The application crashes if it is unable to get a device's configuration descriptor

HID Descriptor Parsing

HID Descriptor tool window now parses the device's HID Report descriptor to a new level of detail

Visualizer Copy/Export Feature

The performance of the Copy/Export command has been enhanced.

GPF: Copying/Exporting from visualizers

The application sometimes crashes when asked to copy/export the contents of the visualizer window

Freeze on playback

The application sometimes freezes when playing back recorded log files

Freeze on descriptor parsing

The application sometimes is unable to parse device's configuration descriptor and freezes

Major upgrade

The product has been completely re-designed and re-written and now is a part of the Device Monitoring Studio.

Wizards and property sheets are incorrectly sized when using non-standard font size

Set Windows standard font size to higher value and run the USB Monitor. You will see that program's wizards and property sheets are partly visible.

Performance

Rendering performance has been enhanced

Minor bug fixes

Some small or rare bugs have been fixed.

Request View Configuration

You can configure the Request View. You can specify the minimum packet size to be displayed by the control, you can disable tooltips and per-chunk configuration changes.

Memory leaks in USB Monitor

Each time the USB Device Window is updated, memory is leaked. It is also leaked when you move your mouse pointer of the highlighted item in the Request View.

GPF when the current interface or configuration is changed.

If the device driver changes the current configuration or interface of the device, the USB Monitor causes the General Protection Fault.

GPF with incorrect descriptor structure

If the USB device returns incorrect device or configuration descriptor, the USB Monitor causes the General Protection Fault.

The USB Monitor main window can be made too small.

You can reduce the USB Monitor main window size to the minimum.

The Request View now displays PnP notifications.

PnP notification messages are now captured and displayed in the Request View visualizer.

Monitor next connected device

The USB Monitor now can be configured to wait for the next connected USB device to monitor. You may event have no drivers installed for that device.

Improved USB Device selection dialog.

The USB Monitoring configuration page has been greatly improved.

USB Device Window now supports USB 2.0 devices.

The support for USB 2.0 host controllers and hubs has been added to the USB Device Window.

Monitoring USB Devices

The monitoring module has been completely overwritten. Now it supports monitoring any device without the need to reconnect it as well as supports attaching to the next connected device.

Incorrect requests in Request View.

The Request View can display the incorrect or meaningless requests.

Bugs in Find feature.

The Find feature in Request View sometimes fails to find the match, although there are ones.

Always on top feature.

The USB Monitor can now be forced to stay on top of all other windows. See the View menu for the command.

Find feature.

You can now search for a text in a Request View.

Moving the Start Menu group to another location.

Install the USB Monitor and then move the program group to another location. The USB Monitor will launch the Windows Installer in an attempt to find the modules.

Log files with gaps

Start the "Log File Playback" session. The Serial Monitor may sometimes fail to display correct data or cause a general protection fault.

GPF while playing back log file.

Start the "Log File Playback" session. The Serial Monitor may sometimes fail to display correct data or cause a general protection fault.

Isochronous transfers now supported.

The USB Monitor now supports the URB_ISOCH_TRANSFER function.

Monitoring of "always-connected" USB devices now supported.

The USB Monitor now supports monitoring the devices which cannot be unplugged.

Multiple devices in the USB Monitor configuration window.

Start the New Session Wizard and select the USB Monitor session type. If you ever connected the same device to different ports or hubs you will see the multiple instances of the same device.

GPF when choosing Tools|Settings… menu option

Start the USB Monitor. Select the Tools|Settings… menu option. The program will cause a general protection fault.